Trane® TSC090H3RKA0001

TRANE® Precedent™ DX Cooling Packaged Air Conditioner, TSC090H3 Model, 7.5 ton Nominal, 208 to 230 VAC, 29 RLA/208 LRA, 27 kW Wattage, 6.7 hp, 3500 rpm Rotational Speed, 60 Hz Frequency, 3 ph, Scroll Compressor, Full Face Configuration, 3000 cfm, 12.9 IEER, 11.2 EER, R410A Refrigerant, 89 dB Sound Level, Oversized Motor Drive, 1/2 in Connection, 16 x 25 x 2 in Filter, Steel, Galvanized/Zinc Coated, 88-5/8 in L x 53-1/4 in W x 40-7/8 in H Dimensions

• Provides a 3 min minimum "ON" time and 3 min "OFF" time for compressors to enhance compressor reliability by assuring proper oil return
• Save time and money tracing wires and diagnosing the unit
• Precedent™ boasts a patent-pending 1+1+1 condenser coil, permanently gapped for easy cleaning
• These band heaters provide improved compressor reliability by warming the oil to prevent migration during off-cycles or low ambient conditions
• Every Precedent™ unit has a plastic, removable, dual-sloped drain pan (IAQ) that's easy to clean and reversible to allow installation of drain trap on either side of the unit
• The low voltage terminal board is external to the electrical control cabinet, it is extremely easy to locate and attach the thermostat wire and test operation of all unit functions, this is another cost and time saving installation feature
• All panels in the evaporator section of the unit have cleanable foil-faced insulation, all edges are either captured or sealed to ensure no insulation fibers get into the airstream
• The compact cabinet features a progressive tubular heat exchanger in low, medium and high heat capacities
• The heat exchanger is fabricated using corrosion-resistant aluminized steel tubes and burners as standard on all models, it has an induced draft blower to pull the gas mixture through the burner tubes, the heater has a direct spark ignition system which doubles as a safety device to prove the flame
• The wiring of the low voltage connections to the unit and the zone sensors is as simple as 1-1, 2-2 and 3-3, this simplified system makes it easy for the installer to wire
• Remove two screws for access to the standardized internal components and wiring
• Components are placed in the same location on all units, due to standardized components throughout the line, contractors/owners can stock fewer parts
• Every unit includes provisions for through the base condensate drain connections, This allows the drain to be connected through the roof curb instead of a roof penetration
• Cabinet design ensures water integrity
• Ease of service, installation and maintenance
• Mixed model build enables "fastest in the industry" ship cycle times
• Convertible airflow
• Standard efficiency

• Catalog https://assets.unilogcorp.com/267/ITEM/DOC/Trane_TSC090H3RKA0001_Catalog.pdf