On Wednesday, October 18th, our local technical support line will be unavailable from 10:00 AM to 4:00 PM. Should you require technical assistance during this time, please call 978-657-7779. Our team will redirect your call to a dedicated support line by brand.
CALL TODAY
(978) 657-7779
AFTER HOURS CALL
(978) 284-3309
TOP
30
DISTRIBUTORS 2021
Aspen ABM604-000-WC4LL
Aspen ABM604-000-WC4LL Multi-Position Hydronic Air Handler, 67600 Btu/hr BTU, 120 VAC, 12.6 A, 3/4 hp, 60 Hz, 1480 cfm
- Manufacturers: Aspen Manufacturing
- Brand Name: Aspen
- Item #: 25110
- Rebate Amount:
- MPN: ABM604-000-WC4LL
- Qty. Interval: 1
- Availability: Login for Availability
Upflow or horizontal right as shipped (field-convertible for downflow or horizontal left applications). Can be AHRI matched with most brands of air conditioners or heat pumps. ETL listed for use with either R22 or R410A when a proper metering device is used.
Aspen Multi-Position Hydronic Air Handler, 5 ton Nominal, 67600 Btu/hr, 120 VAC, 12.6 A, 3/4 hp, 60 Hz Frequency, 1 ph, Upflow/Horizontal Configuration, R22/R410A Refrigerant, 1480 cfm Flow Rate, 20 x 20 in Filter, 3 Speed, PSC Blower Motor, Wall Mounting, Steel, Galvanized, 24-1/2 in W x 22-1/4 in D x 57 in H Dimensions
| Model | : | ABM604-000-WC4LL |
| Nominal Capacity | : | 5 ton |
| BTU Rating | : | 67600 Btu/hr |
| Voltage Rating | : | 120 V |
| Amperage Rating | : | 12.6 A |
| HP Rating | : | 3/4 hp |
| Frequency Rating | : | 60 Hz |
| Phase | : | 1 ph |
| Configuration | : | Upflow/Horizontal |
| Refrigerant Type | : | R22/R-410A |
| Flow Rate | : | 1480 cfm |
| Liquid Line Size | : | 3/8 in |
| Suction Line Size | : | 7/8 in |
| Filter Size | : | 20 x 20 in |
| Number of Speeds | : | 3 |
| Motor Type | : | PSC Blower |
| Mounting Type | : | Wall |
| Material | : | Steel |
| Finish | : | Galvanized |
| Dimensions | : | 24-1/2 in W x 22-1/4 in D x 57 in H |
- Sturdy, galvanized steel cabinet with painted front panels
- Cabinet fully in- sulated with 1/2 in faced insulation to prevent sweating and mold growth, to encapsulate glass fibers and to provide excellent R-value
- Modules are easily installed in the field using Molex plugs or can be ordered factory-installed
- Freeze stat is wired into circulating pump control circuit
- Controls are accessible from the front for easy service
- Electrical connections can be made from the top or left
- Fan time delay relay standard for in - creased efficiency
- Totally lead free constructed coil
- Direct drive multi-speed blowers circulate air quietly and efficiently
- 3 speed motors allow for precise air volume selection
- Motor speeds can be easily selected via motor terminals
- Blowers mounted on rails so they can be easily removed for service
- An electronic board controls the functioning of the system reducing moving parts
- The board provides for various hot water supply source connections and the blower time delay to maximize heat/cool extraction
- As an enhanced feature the pump circulates hot water every 6 hours to prevent coil freeze during off cycle
- High efficiency rifled copper tubes/enhanced aluminum fins provide maximum heat transfer
- All coils immersion tested at 500 psi then nitrogen pressurized and factory sealed for maximum reliability
- Liquid-line schrader allows pre-installation pressure testing
Catalog